Actuator Technology

Something not many people know: EBRO produces its own actuators - and has been doing so for 30 years. For EBRO customers this means that butterfly and gate valves can always be equipped with the most suitable actuator. No compromises, just the best possible match of components - this is what the EBRO actuator series stands for.Pneumatic actuators, single or double acting, have been proven for decades. However, industrial process air is expensive. Energy efficiency is therefore the topic of the day. As a manufacturer of valves and actuators, EBRO can specifically match single product components according to customer requirements and within the scope of operating conditions, thus substantially reducing regular operating costs.

 

 

EB-SYD
pneumatic actuator

The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.

Torque range:

27 - 9768 Nm (based on supply pressure of 6 bar)

End positions:

exactly adjustable between -8°/3°

Limit switch- and Control valve-fitting:

VDI / VDE 3845

Control pressure:

min. 2,5 bar, max. 8 bar

Control air:

Filtered compressed air dry or lubri-cated. The pressure condensation point in accordance with (ISO 8573-1:2010, Class 3) has to be ? - 20°C or 10°C under ambient temperature. The maximum particle size in accord-ance with (ISO 8573-1:2010, Class 5) should not exceed 40 ?m. For cycles ? 4 /min please lubricate.

Temperature range:

-20°C to +80°C (standard)
-40°C to +80°C (low temperture)
-15°C to +120°C (high temperture)

Valve interface:

EN ISO 5211

Cylinder liner:

high quality marine grade Aluminium alloy, hard anodized.other coatings upon request

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EB-SYS
pneumatic actuator

The scotch-yoke principle in the EB actuators exactly matches the valve torque characteristics,thus reducing size and air consumption.

Torque range:

35 - 3590 Nm (Air alimentation 6 bar)

End positions:

réglable de -8°/+3°

Limit switch- and Control valve-fitting:

VDI / VDE 3845

Control pressure:

min. 2,5 bar, max. 8 bar

Control air:

Filtered compressed air dry or lubricated.The pressure condensation point in accordance with (ISO 8573-1:2010, Class 3) has to be ? - 20°C or 10°C under ambient temperature.The maximum particle size in accord-ance with (ISO 8573-1:2010, Class 5) should not exceed 40 ?m.For cycles ? 4 /min please lubricate.

Temperature range:

-20°C to +80°C (standard)
-40°C to +80°C (low temperature)
-15°C to +120°C (high temperature)

Valve interface:

EN ISO 5211

Cylinder liner:

high quality marine grade Aluminium alloy, hard anodized.other coatings upon request.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SC
pneumatic linear actuator

This series of linear pneumatic actuators is designed to automate knife gate valves. Available in 6 sizes and different stroke lenghts.

Design type:

Double-acting pneumatic linear actuator

Piston diameter:

Ø 100 mm
Ø 125 mm
Ø 160 mm
Ø 200 mm
Ø 250 mm
Ø 320 mm

Control pressure:

max. 10 bar

Temperature range:

Standard: -30 to +100 °C
High and low temperature design on request

Stroke range:

90 mm up to 1030 mm

Output range:

4524 N - 46322 N (at 6 bar)

Control valve-fitting:

NAMUR, VDI / VDE 3845

Control medium:

clean and dry compressed air acc. to ISO 8573-1: 2010 min. class 3 Other supply media on request

Surface:

Body: anodized
Cover: powder-coated

Approvals/ Certificates:

Following the requirements of DIN EN 15714-3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E50-E210
electric actuator

A compact series of actuators for open/close and control functions.

Temperature range:

-20°C to +70°C

Actuator size:

E 50 - E 210

Duty cycle:

Class C acc. prEN WI69000095

Interface:

EN ISO 5211

Closure time:

6 s - 180 s

Corrosion protection class:

C4 acc. prEN WI 6900095
audited by EN 600068-2-52

Protection type:

IP 67 acc. EN IEC 60529

Insulation class:

F

Limit switch:

max. 250 V AC, 3 A for DS-Actuator
max. 250 V AC, 3 A for WS-Actuator
max. 24 V DC, 10 A for GS-Actuator

Screwed Cable Gland:

Ø min = 6 mm,
Ø max = 13 mm

Handwheel:

15 rotations for 90°

Operating force:

8 Nm for E 50
4 Nm for E 65
20 Nm for E 110
35 Nm for E 160
50 Nm for E 210

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MODULAR SYSTEM E65-E210
electric actuator

Electric quarter turn actuators series E 65 - E 210 with modularsystem are designed to automate control valves.

Temperature range:

-20°C to +70°C

Duty cycle:

Class C acc. to prEN WI69000095

Corrosion protection class:

C4 acc. to prEN WI 6900095tested acc. to EN 600068-2-52

Protection type:

IP67

Insulation class:

F

Limit switch:

max. 250 V AC, 3A

Screwed Cable Gland:

4 x M20 x 1,5
Ø-min = 6 mm
Ø-max = 13 mm

Handwheel:

15 revolutions for for 90°

Potentiometer:

1000 ?

Power feedback:

4-20mA, supply max. 30V DC

Thermo switch:

integrated

Operating force Handwheel:

4 Nm for E 6520 Nm for E 11035 Nm for E 16050 Nm for E 210

Supply voltage:

from 110V AC/1~ to 480V AC/3~

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Visitors: 43,787